Hydrate Compact: instructional videos

Installing, maintaining and repairing yourself, explained step by step.

Knowledge base article

Installation

Drinking fountain installation

The Hydrate Compact box contains:

  • The Hydrate Compact
  • Manual
  • Filter
  • Cable

An adapter is not included in the box. For environmental reasons, we do not include one as standard. You can use almost any other adapter, for example one from an old phone. If you don't have one, you can order the Power USB Adapter 5W separately.

Connect the device to the mains. The outer container remains connected, while you remove the inner container to clean and fill it. This keeps the cables of your drinking fountain neatly tucked away.

Important: make sure the connectors always stay dry. If you do see any moisture, dry them.

After connecting, fill the inner container with water. Pay attention to the maximum water level. Put the filter in the filter holder and replace the lid on the inner container. Place the inner container in the outer container, then the device will recognize it.

Download the Pettadore app from your app store. Make sure your phone is connected to a 2.4 GHz network and click the “+” in the app. Then choose the correct product and follow the instructions in the app.

In the app you can see when you need to replace the filter and when the pump needs maintenance. You can also turn the indicators on and off and switch off the entire drinking fountain. If you click on “how”, you will see which error messages the drinking fountain can display and what might be wrong.

Tip: do not place the drinking fountain too close to the litter box or automatic feeder, as cats do not like that. Cats like to give everything its own space, so a few meters apart is perfect.

Usage and tips

Usage and tips

To remove the lid of the Hydrate Compact, pull it towards you by the small hole with your fingers. You do this when refilling and when maintaining the pump. If you want to refill the drinking fountain, remove the inner container from the outer container and fill it with water. Pay attention to the max line. If the Hydrate Compact is almost empty, it may make more noise.

You reset the drinking fountain with the button on the back. Hold it down for 5 to 10 seconds. When the Hydrate Compact flashes, it has been reset to the factory settings and you can set everything up again.

In the app you can see when you need to replace the filter and when the pump needs maintenance. You can also turn the indicators on and off and switch off the entire drinking fountain. If you click on “how”, you will see which error messages the drinking fountain can display and what might be wrong.

The indicator light shows what is wrong using different colors:

  • Flashing red: the water is almost gone
  • Flashing blue: the filter needs to be replaced
  • Solid blue: the pump needs to be cleaned
  • Flashing red and blue: the water level is low or the lid is not properly attached

When cleaning, make sure that the connectors always remain dry. This is important for the operation of your drinking fountain.

Drink tips

In the past, cats got plenty of moisture from their prey. Today, most cats eat dry food and no longer hunt. That is why we recommend also giving wet food and ensuring your cat has easy access to water. You can do this by:

  • Choose flowing, fresh water. A drinking fountain continuously refreshes the water. If you use a regular water bowl, wash it thoroughly twice a day.
  • Place the water in a smart location. For example, along your cat's walking route, so they pass it often.
  • Move the drinking fountain occasionally. This will pique your cat's curiosity.
  • Keep it away from the litter box and food. Cats like to give everything its own space; a few meters apart is perfect.

Also check out our cheatsheet under "Downloads", with more than 100 tips for caring for your cat.

Maintenance

Maintenance service

A thorough cleaning will extend the life of your Hydrate Compact. We recommend cleaning it thoroughly every 60 days. Here’s how:

  1. Remove the lid from your drinking fountain and make sure the connectors stay dry. Pour out the water.
  2. Remove the filter and clean the lid thoroughly with water and paper or an unscented wipe.
  3. Open the pump by removing the small covers. Remove the rotor with needle-nose pliers or tweezers and clean the area with a cotton swab. Also clean the pump itself with the cotton swab. Put everything back.
  4. Place a new filter in the filter holder.
  5. Clean the inner container thoroughly and dry it. Refill it with water and put the lid on.
  6. Place the inner container back into the outer container.

Indicate in the app that you have replaced the filter and cleaned the drinking fountain. The counter will then be reset.

Replace filters

Replacing the Hydrate Compact filter is easy:

  1. Remove the lid from your drinking fountain and pull on the tab of the old filter.
  2. Remove the old filter and insert the new one. Make sure the contacts on your drinking fountain do not get wet. If they do, dry them thoroughly.
  3. Insert the new filter with the tab facing down.
  4. Replace the lid.

Indicate in the app that you have replaced the filter. The device will then count down until the next replacement is due.

Install new pump

Have you received a new pump, for example through your Care & Repair plan? Here is how to install it:

  1. Remove the lid from the drinking fountain and empty the water from the inner container. Make sure the connectors stay dry.
  2. Remove the old pump with its holder from the inner container.
  3. Check the connection points. They must be dry and clean. If you see any erosion, please contact our customer service.
  4. Place the new pump with its holder in position. Press the tube firmly against the pump so that it does not double up.
  5. Fill the inner container with water, put the lid on, and place the inner container back into the outer container.

Do you have any questions? Please contact our customer service.

Troubleshooting

Drinking fountain is leaking

A leak with your Hydrate Compact can have two causes:

  • Your cat is playing with the water. Or water is getting next to the device because your cat is licking it. Cats are simply playful. Place your drinking fountain in a spot where a wet floor won't matter.
  • The filter is clogged with dirt. Then the water is not being fed through quickly enough, the drinking fountain overflows, and the water spills over the edge. Check the filter and replace it if necessary.

Do you notice that your cat is getting the connectors wet? Then place the device against the wall, so that the connectors stay dry.

Are you still having problems? Then contact our customer service.

No water flow

Is no water coming out of your drinking fountain? This is often due to the power supply: the adapter, the cable, or one of the connection points.

  • Adapter or cable: first try a different adapter or a different cable.
  • Connectors: check the connection points on the lid and the inner container. They must be dry and free of corrosion. If necessary, dry them and remove corrosion with a knife or a steel brush.
  • Dirty pump: something may be stuck in the pump. Remove the lid of the drinking fountain, and then the pump cover and housing. Remove the rotor with pliers or tweezers. Clean the rotor and the space where it was with a cotton swab. Put everything back.
  • Tube not properly attached: push the plastic tube completely onto the pump. Otherwise, it may fold over when replacing the housing, and no water will flow through.

Still having problems? Then contact our customer service.

Drinking fountain makes noise

Is your Hydrate Compact making a lot of noise? There are several solutions for this.

Is your Hydrate Compact still new? Then wait a week. A new pump often needs time to break in, after which the noise usually disappears.

Is your Hydrate Compact a bit older? Then first clean the pump thoroughly. A clean pump can pump water more easily and often makes less noise. Remove the lid, remove the pump housing, and remove the rotor with pliers or tweezers. Clean the area with a cotton swab. Then put the rotor, housing, and lid back. Make sure the connection points stay dry.

Also check that the pump is not vibrating against the container. That creates a lot of extra noise. If that is the case, turn the pump slightly.

The surface also makes a difference. The device has silicone feet and a silicone insert that dampen the noise. On a wooden table, the device sounds louder than on, for example, a concrete floor.

A drinking fountain on a hard floor normally makes about 40 to 50 decibels. You can measure this with a free app.

Are you still experiencing noise or do you need help? Then contact our customer service. They will ask you for a video and the number of decibels you measure.

Cat does not want to drink

Use these tips to help your cat get used to the drinking fountain:

  • Place the drinking fountain where the old water bowl used to be. That way, your cat will know where to go.
  • Let your cat smell and feel the water. Cats rely less on sight and more on smell and touch.
  • Play by the drinking fountain. Let your cat touch the water, for example by shining a laser pointer or using another toy on it. This will help your cat realize it is water.
  • Remove the old water bowls. Then your cat will naturally get to know the drinking fountain.
  • Give it time. Give your cat at least two weeks to get used to it. Cats can be stubborn and often need a little longer before something new fits into their routine.

Still have questions? Contact our customer service team.

Check connectors

If the drinking fountain does not work or only works intermittently, check that the connectors are clean and dry.

Repair

Replace outdoor enclosure

Is the outer casing damaged? In this video, you'll see how to replace it.

Replace inner tray

This is how you remove the old inner tray and replace it with a new one.

Replace filter tray

The filter holder keeps the filter in place. Here you can see how to insert a new filter holder.

Replace connection pins

Are the connection pins no longer making good contact? Here’s how to replace them.

Replace reset button, USB cable and circuit board

Is the reset button or USB port no longer working? This video shows you how to replace them. First, unplug the device from the wall outlet.

Replace pump cover

The pump cover fits over the pump. Here you can see how to remove it and install a new one.

Replace silicone tubing

Is the tube leaking or not fitted properly anymore? In this video, you'll see how to install a new silicone tube.