Nutri View: instructional videos

Installing, maintaining and repairing yourself, explained step by step.

Knowledge base article

Installation

Automatic feeder installation

The Nutri View box contains:

  • The Nutri View
  • Manual
  • Adapter
  • Cable

Unpack the box. Open the lid and remove the loose parts, such as the food bowl. Slide the food bowl into place. Connect the Nutri View to the power outlet using the cable and adapter. The connection point is located on the bottom of the device.

You can neatly tuck away the cable, as the outer container always stays in the same place. To clean it, simply remove the food bowl and the inner container.

Download the Pettadore app from your app store. Make sure your phone is connected to a 2.4 GHz network and tap the “+” in the app. Select the Nutri View, check that the light is flashing, and enter your network and password. Then follow the instructions on your phone.

Next, hold the QR code from the app in front of the Nutri View camera. If you hear a beep, the device has scanned the code and you can complete the installation. Don't forget to remove the protective film from the camera.

If that doesn't work, select AP mode in the app and connect to “Smart Life”. You will hear a beep and the light will stay lit once the device is paired.

Tip: do not place the automatic feeder too close to the litter box or the drinking water, as cats do not like that. Cats prefer to give everything its own space; a few meters apart is perfect.

Usage and tips

Usage and tips

The cable of the Nutri View can be hidden in the cable management tray. You do not need to move the outer container for cleaning and maintenance.

How to set up a feeding schedule

In the app, you can set up a schedule to feed your cat multiple times a day. To do this, you need to know how much food is in one portion:

  1. Press the button for an extra portion and let it dispense continuously.
  2. Empty the food bowl.
  3. Press the button again. What comes out is one portion. Weigh it.

For example: if one portion is 10 grams and your cat needs approximately 80 grams of food per day, you divide 8 portions among the feeding times. We recommend at least 4 feedings per day.

In the app, you can also:

  • disable the schedule on certain days;
  • give an extra portion;
  • set how many portions you receive when you press the button, for example always 3;
  • disable the button on the device, useful with children in the house or a clever cat;
  • share the device with other accounts, so multiple people can access it.

The camera

Through the video function in the app, you can keep an eye on your cat. You can talk to your cat through the microphone, dispense food while watching, and take photos and videos.

Nutritional tips

Cats naturally prefer to eat smaller portions more frequently throughout the day. Therefore, set up multiple feeding times. We recommend at least 4 times a day, but you can also set 8 or more.

Also give your cat wet food once a day. You feed this yourself, so it is a nice moment to give your cat some attention. Choose a fixed time, so your cat knows when to expect wet food.

Also check out our cheatsheet under “Downloads”, with more than 100 tips for caring for your cat.

Chunk size

Use kibble that is 5 to 12 mm in size. If the kibble is smaller or larger, the automatic feeder may not always dispense the correct portions.

Power bank as a backup

You can connect a power bank as an emergency power supply. If the power goes out, the Nutri View automatically switches to the power bank, and your cat will still receive food according to the schedule. The device will not run for long on a power bank alone; how long depends on the power bank. Therefore, reconnect the device to the mains in good time.

Maintenance

Maintenance service

Clean your Nutri View regularly to keep it working properly.

  • Food bowl: remove it and clean it with water and paper or a cloth.
  • Inner container: empty it first, then clean it thoroughly with water and paper. Don't forget the space between the inner container and the food bowl.
  • Outside: wipe it with a cloth.

Troubleshooting

Overshooting and jamming

Does the app indicate that the food is stuck? Then the food bowl is often too full or the inner bowl is too empty.

  • Inner bowl empty: the Nutri View flashes and you receive a notification in the app.
  • Food bowl too full: the light comes on because the food is blocking the sensor. The next feeding times will only proceed once the sensor is clear again.

Is there often still food in the bowl? Then the portions may be too large and you can make them smaller. If your cat suddenly eats less than usual, keep a close eye on them and contact your veterinarian if in doubt.

Does the light stay on or does it not respond to an empty bowl? Then the sensors may be covered in dirt. Clean the inner bowl, especially around the sensors.

Does the problem keep recurring? Then reset the device by pressing and holding the extra portion button for 5 to 10 seconds.

Are you still having problems? Then contact our customer service.

Feed gets stuck

Is the feed getting stuck in the Nutri View? In this video, you'll see step by step how to fix it.

Remove speaker

In this video you will see how to remove the speaker from the Nutri View.

I am not home and I have a problem

Does your device give an error message while you are away? First, check the camera in the app to see what is going on. If something is wrong, it is useful if someone, such as a cat sitter or the neighbors, can go and take a look.

  • “Jam”: the food bowl is often too full.
  • “Abnormal feeding”: then someone really needs to check the device.

Can't figure it out? Then contact our customer service, and we will help you as best as possible.

Repair

Replace food bowl

Have you received a new food bowl, for example through your Care & Repair plan, or is the old one damaged? In this video you will see how to replace it.

Replace inner tray

This is how you remove the old inner tray and replace it with a new one.

Replace top section

In this video, you will see how to replace the top part of the Nutri View.

Replace base

In this video, you will see how to replace the base of the Nutri View.

Replace the sensors at the bottom

Is the Nutri View no longer responding properly to the food, even after cleaning the sensors? Here’s how to replace the sensors.

Replace feed slider

How to replace the feed slide of the Nutri View.

Replace feed rotor

The feed rotor distributes the feed into portions. This is how you replace it.

Replace feed supply

This is how you replace the food delivery system, the part that brings the food to the food bowl.

Engine replacement

Is the automatic feeder no longer working? In this video, you'll see how to replace the motor. First, unplug it from the wall outlet.

Replace main print board

In this video, you will see step by step how to replace the main printed circuit board. First, remove the plug from the socket.